WRC BULLETIN
WRC BULLETIN / 米国溶接研究協会誌
-
WRC BULLETIN 593: Comparison of Methods for Evaluating Local Thin Areas in Cylinders Subject to Pressure, Moments and Forces
¥67,870(税込) -
WRC BULLETIN 626: Estimation of Cyclic Fatigue Properties from Monotonic Tensile Data
¥60,500(税込) -
WRC BULLETIN 580: Heat Exchanger Tube Bundle Risk-Based Inspection
¥48,400(税込) -
WRC BULLETIN 627: Improvements to the API 581 Probability of Failure on Demand Updating Methodology for Pressure Relief Devices Using Bayesian Inference
¥61,600(税込) -
WRC BULLETIN 550: Standardization of Fatigue Methods for Use in API 579-1/ASME FFS-1, 3rd Edition
¥68,200(税込) -
WRC BULLETIN 617: Development of New Methods to Incorporate Secondary Stresses into Level 2 and 3 Crack Assessments, 3rd Edition
¥61,600(税込) -
WRC BULLETIN 623: Plasticity Correction Methods for Elastic Stress Ranges in Fatigue Assessment per API 579-1/ASME FFS-1 and the ASME B&PV Codes
¥85,800(税込) -
WRC BULLETIN 618: Stress-Strain Curve Models for Use in Fitness-For-Service Assessments
¥68,200(税込) -
WRC BULLETIN 610: Structural Strain Method: A Unified Structural Fatigue Evaluation Procedure from the Low-Cycle to High-Cycle Fatigue Regime
¥111,100(税込) -
WRC BULLETIN 622: Cycle Counting Algorithms for use with API 579-1/ASME FFS-1 and the ASME B&PV Codes
¥68,200(税込) -
WRC BULLETIN 611: Technical Assessment of Hardness-to-Strength Correlations for Fitness-For-Service Evaluations, 2nd Edition
¥68,200(税込) -
WRC BULLETIN 452: Recommended Practices for Local Heating of Welds in Pressure Vessels, 2nd Edition
¥72,600(税込) -
WRC BULLETIN 605: Updated Creep Crack Growth Procedures for API 579-1/ASME FFS-1
¥61,600(税込) -
WRC BULLETIN 606: Developing a Ductile Instability Assesssment Procedure for Part 9 of API 579-1/ASME FFS-1
¥61,600(税込) -
WRC BULLETIN 558: Recognition of UNS S34751 (347LN, aka 347AP) Alloy in API 579-1/ASME FFS-1 and API Std 530, 3rd Edition
¥36,300(税込) -
WRC BULLETIN 522: Parametric Equations for Yield Strength, Tensile Strength, and Rupture Data for API Std 530
¥61,600(税込) -
WRC BULLETIN 619: Development of Analytical Model of API 650 Liquid Storage Tanks for API 579-1/ASME FFS-1
¥61,600(税込) -
WRC BULLETIN 624: Evaluation of 1996 Main Steam Piping Failure Mt. Storm Unit 1
¥48,950(税込) -
WRC BULLETIN 549: Development of Fitness-For-Service Assessment Procedures for Weld Misalignment and Shell Distortions in API 579-1/ASME FFS-1, 2nd Edition
¥61,600(税込) -
WRC BULLETIN 510: Analysis of the Effects of Temperature on Bolted Joints, 3rd Edition
¥55,000(税込) -
WRC BULLETIN 537: Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings for Implementation of WRC Bulletin 107, 4th Edition
¥99,550(税込) -
WRC BULLETIN 604: Metallurgical Evaluation of Cast Duplex Stainless Steels and Their Weldments
¥44,000(税込) -
WRC BULLETIN 603: Characterization of the Fine-Scale Weld Deposit Microstructure and its Influence on the Elevated Temperature Properties of 2.25Cr-1Mo-0.25V Weldments in Heavy Wall Pressure Vessels
¥44,000(税込) -
WRC BULLETIN 599: Recommendations for Evaluating Resistance to Brittle Fracture for Carbon and Low Alloy Steel Equipment and Piping
¥56,870(税込) -
WRC BULLETIN 598: Metallurgical Causes for the Occurrence of Creep Damage in Longitudinally Seam- Welded Cr-Mo High Energy Piping
¥73,920(税込) -
WRC BULLETIN 597: High Energy Piping Compendium of Optical and Cryo-Crack Creep Damage Assessment
¥73,920(税込) -
WRC BULLETIN 594: Recognition of UNS S31740 (317AP) Alloy in API 579-1/ASME FFS-1 and API Std 530
¥42,790(税込) -
WRC BULLETIN 592: Studies of High Temperature Hydrogen Related Damage in Welded Carbon Steel Components Used in Refineries
¥44,000(税込) -
WRC BULLETIN 583: Development of General Formulas for Bolted Flanges
¥61,930(税込) -
WRC BULLETIN 578: Stress Redistribution Due to Inelastic Strains in Thick or Thin-Walled Cylinder, Spherical and Conical Shells
¥44,000(税込) -
WRC BULLETIN 560: Understanding Welds in Elevated Temperature Service
¥73,920(税込) -
WRC BULLETIN 503: Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials
¥56,870(税込) -
WRC BULLETIN 591: API 579-1/ASME FFS-1: Part 5 Evaluation of Local Thin Areas in the Vicinity of Head-to-Shell Transitions
¥46,200(税込) -
WRC BULLETIN 542: Stud and Nut Structural Tension Capacity Matching, 2nd Edition
¥52,360(税込) -
WRC BULLETIN 602: Commentary on Proposed Weld Residual Stress Solutions in WRC Bulletin 581
¥58,300(税込) -
WRC BULLETIN 615: Evaluation of Hydrogen Attack Damage in C-1/2Mo Weldment (MPC-18)
¥46,200(税込) -
WRC BULLETIN 607: Expansion of 300-Series L-Grade Creep Dataset for API Std 530 and API 579-1/ASME FFS-1
¥46,200(税込) -
WRC BULLETIN 541: Evaluation of Material Strength Data for Use in API Std 530
¥118,250(税込) -
WRC BULLETIN 562: Recommendations for Establishing the Minimum Pressurization Temperature (MPT) for Equipment
¥70,400(税込) -
WRC BULLETIN 581: Development of New Residual Stress Profiles for API 579-1/ASME FFS-1
¥82,500(税込)







