SAE規格 AMS-S-8802, Revision F, 2022: Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities

SAE規格 AMS-S-8802, Revision F, 2022

産業規格・仕様書  >  SAE  > 




SAE規格 AMS-S-8802, Revision F, 2022

28,930(税込)

数量

書名

SAE AMS-S-8802 Revision F, 2022: Sealing Compound, Fuel Resistant, Integral Fuel
Tanks and Fuel Cell Cavities

SAE規格 AMS-S-8802, Revision F, 2022: シーリングコンパウンド、耐燃料性、一体型燃料タンクおよび燃料電池腔
発行元 SAE International (SAE)
発行年/月 2022年10月   
装丁 ペーパー
ページ数 13 ページ
発送予定 海外倉庫よりお取り寄せ 1-2週間以内に発送します
※PDF版 (シングルユーザー)をご希望のお客様は別途お問合せ下さいませ。
※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。 最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。


 

 

Description

Form
This specification covers fuel-resistant, two-component polysulfide synthetic rubber compounds which cure at room temperature.

Application
This sealing compound has been used typically for sealing and repairing integral fuel tanks, cabin pressure sealing, and aerodynamic smoothing, but usage is not limited to such applications. It may be used for faying surface sealing, for wet installation of fasteners, for overcoating fasteners, and for sealing joints and seams. The sealing compound can be used in fuel areas as well as in non-fuel areas. It may, in some cases, be used as a non-structural adhesive. The sealant is capable of continuous service use from -65 to +250 °F (-54 to 121 °C). AMS3100 adhesion promoter may be applied prior to application of the sealant.

Classification
- Types Sealing compounds covered by this specification are classified as follows:
- Type 1 - Dichromate Cured Sealant. Material with a dichromate curing agent.
- Type 2 - Manganese Dioxide Cured Sealant. Material with a manganese dioxide curing agent.

Classes
- The following classes apply to both Type 1 and Type 2 sealing compounds:

Class A - Suitable for application by brush. Available in the following application times, in hours:
- A-1/2
- A-1
- A-2

Class B - Suitable for application by extrusion gun or spatula. Available in the following application times, in hours:
- B-1/2
- B-1
- B-2
- B-4

Class C - Suitable for extrusion gun, spatula, brush, or roller. Available in the following application times, in hours:
Notation: ( ) Assembly time, in hours:
- C-8(20)
- C-8(48)
-C-24(80)