RTCM規格 10401.2, 2006 Edition Standard for Differential Navstar GPS Reference Stations and Integrity Monitors (RSIM)

RTCM規格 10401.2, 2006 Edition

産業規格・仕様書  >  RTCM  > 




RTCM規格 10401.2, 2006 Edition

78,100(税込)

数量

書名

RTCM 10401.2, 2006 Edition Standard for Differential Navstar GPS Reference Stations and
Integrity Monitors (RSIM)
発行元 RTCM
装丁 Softcover
納期 海外倉庫よりお取り寄せ 2-4週間以内に発送します
※PDF版をご希望のお客様は別途お問合せ下さいませ。
※※当ウェブ・ショップに掲載のない規格につきましては、別途お問合せ下さいませ。
※掲載の規格は、当ウェブ・ショップに掲載時点で確認できた最新版でございます。 最新の発行状況につきましては受注時に改めて確認をさせて頂きますので予めご了承下さい。

 

Description

This document delineates the performance, functional, interface, and environmental parameters for Differential GPS (DGPS) reference stations, integrity monitors and Transmitter/RSIM interface modules. The intent of this document is to facilitate both the manufacture and the purchase of service provider equipment in order to make the use of DGPS more economical and deployable through standardization. It will encourage consistency from one service provider to the next and thereby facilitate the use of DGPS.

This document is specific to the maritime area only in that the data link modulation specifications and certain control parameters are given for Minimum Shift Keying (MSK) Modulation in the Medium Frequency (MF) band in which Marine Radiobeacons operate. Otherwise, this document is readily applicable to many other DGPS applications including terrestrial and satellite links.

Performance parameters are defined in order to establish common terms of reference for evaluation, comparison, and certification. Where appropriate, minimum performance levels are specified; otherwise, minimum performance depends on the requirements for the specific application, and will be published in the service provider's broadcast standard.

A set of Reference Station/Integrity Monitor (RSIM) Messages is defined in order to standardize equipment interface parameters and to facilitate the flow of information between the various equipment (Reference Station, Integrity Monitor, Transmitter/RSIM Interface Module, and Control Station) regardless of the manufacturer. Within this specification, RTCM Recommended Standards For Differential NAVSTAR GPS Service pseudorange correction and ancillary messages are denoted as RTCM messages, and RTCM SC104 RSIM messages are denoted as RSIM messages. Type 1 RTCM messages are denoted RTCM #1, and Type 1 RSIM messages are denoted RSIM #1.